|
KV2
Sound systems
Active Full Range Module
No other speaker this size can match the performance
and resolution of the EX10. That's the beauty of an active loudspeaker
design in which the amplifiers are perfectly matched to the transducers and
every component is rigorously optimized.
To achieve high output from a small cabinet you need a
lot of power. Precisely selected amplifier topologies have been designed to
deliver 500 watts of total power through a unique LF amp designed for
perfect control of the woofer working alongside a HF amp implementing a
discreet, classic Class AB push pull topology with Intermodulation
Distortion (IMD) restricting output transformer.
The primary challenge in building a two-way speaker
system is that the crossover point is usually in the middle of critical
vocal frequencies. Getting the woofer to operate seamlessly up to and
slightly beyond the crossover frequency is the reason why most two-way
systems simply lack resolution and depth.
KV2 Audio has implemented a technology that eliminates
voice coil inductance, resulting in a flat impedance response above the
resonance point, achieving faster transient response through increased force
and control of the moving mass. This technology linearises acoustic and
electrical phase response, reduces harmonic distortion and increases power
transfer and transducer speed. The speaker now behaves like a woofer at
lower frequencies and like a mid-range at higher frequencies-allowing a
seamless transition at the crossover frequency.
Complete
on-board signal management is provided including equalization, phase
adjustment, crossover filters and thermal and overdrive protection. The EX
10 can be used as a full range solution or with the EX 2.2 and EX 2.5 Active
Subwoofer |
